4.
Highlight Create and press Enter.
The Create Logical Drive Step 1/2 screen appears.
Use this screen to select the physical drives for your logical drive.
5.
Press the arrow keys to highlight a physical drive. Then press the spacebar
to select the physical drive.
An asterisk (*) appears at the left of each selected physical drive.
6.
When you have selected all your physical drives, highlight Next and press
Enter.
The Create Logical Drive Step 2/2 screen appears, with default logical drive
settings.
7.
To change the RAID Level, highlight RAID Level and press Enter.
In the popup menu, highlight your choice of RAID Level and press Enter.
SuperTrak Installation Task List
9