Operating Tips - sunjoe SWJ700E Manual Del Operador

2. Make a loop in the power cord and push it up through
the hole in the handle and around the cord restraint hook
(Fig. 12), then connect the extension cord to the
appliance cord.
Fig. 12
Cord restraint hook
3. Make sure the guide bar is not touching the ground or any
other object.
4. Hold the chain saw firmly with both hands.
5. To turn the tool ON, push and hold the safety lock button
with your thumb and then squeeze the trigger with your
fingers. Once the tool is running, you can release the
safety lock button (Fig. 13).
Fig. 13
Safety lock button
6. To turn the tool OFF, release the trigger switch (Fig. 13).
NOTE: Do not press the trigger switch until you are ready to
make a cut.

Operating Tips

m
WARNING!
For your safety and that of others:
1. Do not use the machine without reading the instructions
carefully. Become acquainted with the controls and
the proper use of the machine. Learn how to stop the
machine quickly.
10. Before you start the unit, make sure the chain saw is not
m
not use under wet conditions.
Trigger switch
IMPORTANT! Always remember that an incorrectly used chain
saw may harm or disturb others and have a serious impact on
the environment.
To respect people and the environment:
m
for felling and delimbing.
12
2. Keep in mind that the operator or user is responsible for
accidents or hazards occurring to other people or
their property.
3. Always wear suitable clothing when using the machine.
Wear anti-vibration gloves and other personal
protective equipment.
NOTE: All the above-mentioned precautions do not,
however, guarantee the prevention of certain risks – i.e.
Raynaud's phenomenon or carpal tunnel syndrome.
For operators who use this machine for prolonged
periods, it is therefore recommended to have periodic
checkups on their hands and fingers. If any of the above
mentioned symptoms should appear, please contact a
physician immediately.
4. Work only in daylight or good artificial light.
5. Take utmost care when working near metal fences.
6. Take care not to hit the bar hard against foreign objects or
flying debris caused by the movement of the chain.
7. Do not operate the chain saw in a tree, on a ladder, or on a
scaffold. This is extremely dangerous.
8. Use extreme caution when cutting small brush, saplings,
or limbs under tension, because slender and tense
material may catch the saw and be whipped towards you,
pull you off balance or spring back.
9. Do not cut vines and/or small underbrush.
contacting any object.
CAUTION!
The chain coasts after saw is turned off. Do
• Avoid using the machine in environments or at times of the
day when it may disturb others.
• Scrupulously comply with local regulations and provisions
for the disposal of waste materials after sawing.
• Scrupulously comply with local regulations and provisions
for the disposal of oils, damaged parts or any elements
which have a strong impact on the environment.
• A certain amount of chain lubricating oil is released into
the environment when the machine is running, so only use
biodegradable oils made specifically for this use.
• To avoid the risk of fire, do not leave the machine with the
engine hot on leaves or dry grass.
WARNING!
It takes specific training to use the machine