Samsung 5 Serie Manual Del Usuario página 14

Ocultar thumbs Ver también para 5 Serie:
Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

Basic Features
Picture Options
O
MENU
m → Picture → Picture Options →
ENTERE
In PC mode, you can only make changes to the
Tone, Size and Auto Protection Time.
Color Tone
Size
Digital Noise Filter
MPEG Noise Filter
HDMI Black Level
POWER
P
Film Mode
Auto Protection Time
Color Tone (Cool / Normal / Warm1 / Warm2)
Warm1
or Warm2 will be deactivated when the
picture mode is Dynamic.
Settings can be adjusted and stored for each
external device connected to an input on the TV.
Size
: Your cable box/satellite receiver
SLEEP
may have its own set of screen sizes as
well. However, we highly recommend
you use 16:9 mode most of the time.
16:9: Sets the picture to 16:9 wide
mode.
Zoom1: Use for moderate
magnification.
Zoom2: Use for a stronger magnification.
Wide Fit: Enlarges the aspect ratio of the picture to fit
the entire screen.
FAV.CH
4:3: Sets the picture to basic (4:3) mode.
Do not watch in 4:3 format for a long time. Traces
of borders displayed on the left, right and center
of the screen may cause image retention (screen
burn) which are not covered by the warranty.
Screen Fit: Displays the full image without any cut-off
when HDMI (720p / 1080i / 1080p) or Component
S.MODE
(1080i / 1080p) signals are inputted.
NOTE
x
After selecting
1. Press the ◄ or ► button to select Position.
2. Press the ENTERE button.
3. Press the ▲, ▼, ▲ or ▼ button to move the
picture up or down.
4. Press the ENTERE button.
5. Press the ◄ or ► button to select Reset.
6. Press the ENTERE button.
14
English
Picture Options
: Normal
: 16:9
: Auto
: Auto
: Normal
INFO
: Off
CHLIST
: 2 hours
U Move E Enter R Return
P.MODE
P.SIZE
MTS
TOOLS
MEDIA.P
Zoom1, Zoom2 or Wide Fit:
x
After selecting
or Component (1080i / 1080p) mode: Adjusts the
Position or Size by using ▲, ▼, ◄, ► button.
x
HD (High Definition): 16:9 - 1080i/1080p (1920x1080),
720p (1280x720)
Color
x
Settings can be adjusted and stored for each
external device you have connected to an input on
the TV.
Input Source
TV, AV,
Component (480i, 480p)
DTV(1080i),
Component (1080i, 1080p),
HDMI (720p, 1080i, 1080p)
PC
Digital Noise
/ Auto Visualization / Demo): If the broadcast signal
received by your TV is weak, you can activate the Digital
Noise Filter feature to reduce any static and ghosting that
may appear on the screen.
When the signal is weak, try other options until the
best picture is displayed.
Auto Visualization : When changing analog channels,
displays signal strength.
Only available for analog channels.
When bar is green, you are receiving the best
possible signal.
MPEG Noise Filter (Off / Low / Medium / High /
Auto): Reduces MPEG Noise of the picture.
Disabled under PC mode.
HDMI Black Level (Normal / Low)
level on the screen to adjust the screen depth.
Available only in HDMI mode (RGB signals).
Film Mode (Off / Auto1 / Auto2)
automatically sense and process film signals from all
sources and adjusts the picture for optimum quality.
Available in TV, AV, COMPONENT (480i / 1080i)
and HDMI (480i / 1080i).
Auto Protection Time (2 hours / 4 hours / 8 hours
/ 10 hours / Off): If the screen remains idle with a still
mage for a certain period of time defined by the user, the
screen saver is activated to prevent the formation of host
images on the screen.
Picture Reset (OK / Cancel)
Resets your current picture mode to its default settings.
Screen Fit in HDMI (1080i / 1080p)
Picture Size
16:9, Zoom1,
Zoom2, 4:3
16:9, 4:3, Wide Fit,
Screen Fit
16:9, 4:3
Filter (Off / Low / Medium / High / Auto
: Selects the black
: Sets the TV to

Publicidad

Capítulos

Tabla de contenido
loading

Tabla de contenido