DT SWISS R 535 ONE Manual Del Usuario página 15

4 USING THE DT SWISS HIGH PRESSURE SHOCK PUMP
On shocks that have been purchased as aftermarket components, the DT Swiss shock pump is part of
the supplied package.
2
The DT Swiss shock pump has a pressure gauge (1) which can be used to precisely adjust the shock's
pressure. A release valve (2) allows the pressure in the shock to be reduced. A valve lever (3) on the
pump head (4) allows the shock pump to be unscrewed without any loss of pressure.
Operating the shock pump
A Screw the pump head (4) fully onto the valve on
the shock.
B Close the valve lever (3) (push the lever towards
the valve) and pump up the shock.
Closing the valve lever (3) opens the valve on
the shock.
Pressing the release valve (2) allows the
pressure in the shock to be reduced.
C Open the valve lever (3) (push the lever towards
the pump tube).
Opening the valve lever closes the valve on
the shock. No air is able to escape when the
pump is unscrewed.
D Unscrew the pump head (4) from the valve on the shock.
1
3 4
A B C D
15