DJI AGRAS T30 Guia De Inicio Rapido página 11

Performing an Operation
Power on the remote
controller and aircraft.
Tap Use and tap Start.
Only take off in open areas and set an appropriate auto-takeoff height according to the operating
●
environment.
An operation can be paused by moving the control stick slightly. The aircraft will hover and record the
●
breakpoint. After which, the aircraft can be controlled manually. To continue the operation, select it again
from the Executing tag in
operation. Pay attention to aircraft safety when returning to a breakpoint.
In Route Operation mode, the aircraft is able to circumvent obstacles, which is disabled by default and can
●
be enabled in the app. If the function is enabled and the aircraft detects obstacles, the aircraft will slow
down and circumvent the obstacles and return to the original flight path.
Users can set the action the aircraft will perform after the operation is completed in the app.
●
More Operation Modes and Functions
Refer to the Agras T30 User Manual for more information about the A-B Route, Manual, and Manual Plus Operation modes
and on how to use functions such as Connection Routing, Operation Resumption, System Data Protection, Empty Tank, and
Smart Supply Reminder.
6. Maintenance
Clean all parts of the aircraft and remote controller at the end of each day of spraying after the aircraft returns to a normal
temperature. DO NOT clean the aircraft immediately after operations are completed.
A. Fill the spray tank with clean water or soapy water and spray the water through the nozzles until the tank is empty. Repeat
the step twice more.
B. Remove the spray tank strainer, nozzle strainers, and nozzles to clean them and clear any blockage. Afterwards, immerse
them in clean water for 12 hours.
C. Make sure that the aircraft structure is completely connected so that it can be washed directly with water. It is
recommended to use a spray washer filled with water to clean the aircraft body and wipe with a soft brush or wet cloth
before removing water residue with a dry cloth.
D. If there is dust or pesticide liquid on the motors, propellers, or heat sinks, wipe them with a wet cloth before cleaning the
remaining water residue with a dry cloth.
E. Wipe the surface and screen of the remote controller with a clean wet cloth that has been wrung out with water.
Refer to the disclaimer and safety guidelines for more information on product maintenance.
Download the Agras T30 User Manual for more information:
https://www.dji.com/t30/downloads
10
Tap Execute Task in the
home screen of the app.
Set operation parameters
and confirm.
list. The aircraft will return to the breakpoint automatically and resume the
Tap and select the field
from the field list.
Set the auto-takeoff height by setting the Connection Routing
Altitude in the app and move the slider to take off. The aircraft
will perform the operation automatically.
Tap Edit to edit the waypoints
and flight route again.