Metra 99-8250 Instrucciones De Instalación página 3

ISO DIN radio provision with pocket
1. Attach the radio brackets to the
radio trim panel using (4) #8 x 3/8"
Phillips screws supplied. (Figure A)
2. Attach the pocket to the bracket
assembly using the (4) #8 x 3/8"
Phillips screws supplied. (Figure B)
3. Remove the metal DIN sleeve and
trim ring from the aftermarket radio.
4. Slide the radio into the completed
assembly, and then secure it to the
assembly using screws supplied
with the radio. (Figure C)
5. Locate the factory wiring harness
and antenna connector in the
dash, and complete all necessary
connections to the radio. Metra
recommends using the proper
mating adapter from Metra and/or
AXXESS. Re-connect the negative
battery terminal and test the radio
for proper operation.
6. Reassemble the dash in reverse
order of disassembly.
Kit Assembly
(Figure A)
99-8250
(Figure B)
3
(Figure C)