Publicidad

Idiomas disponibles

Idiomas disponibles

Enlaces rápidos

Installation instructions for part 99-3011S
Chevy Cruze
KIT FEATURES
• ISO DIN radio provision with pocket
• Double DIN radio provision
• Painted Silver to match factory finish
KIT COMPONENTS
• A) Radio Trim Panel • B) Radio Brackets • C) Pocket • D) (4) #8 x 3/8" screws
A
B
WIRING & ANTENNA CONNECTIONS (sold separately)
Wiring Harness: GMOS-044 • LC-GMRC-044
Note: The GMOS-044 or LC-GMRC-044 will be necessary to retain the center dash display information
Antenna Adapter: • 40-EU55
TOOLS REQUIRED
• Panel removal tool • Phillips screwdriver • Socket Wrench
METRA. The World's best kits.
APPLICATIONS
(with single color, monochrome screen)
99-3011S
C
1-800-221-0932
2011-up
D
metraonline.com
Table of Contents
Dash Disassembly
– Chevy Cruze (with single color,
monocrome screen) 2011-up .............................. 2
Kit Assembly
– ISO DIN radio provision with pocket ...................... 3
– Double DIN radio provision ................................... 3
CAUTION: Metra recommends disconnecting the
negative battery terminal before beginning any
installation. All accessories, switches, and especially
air bag indicator lights must be plugged in
beforereconnecting the battery or cycling the ignition.
NOTE: Refer to the instructions included with the
aftermarket radio.
© COPYRIGHT 2004-2015 METRA ELECTRONICS CORPORATION

Publicidad

Tabla de contenido
loading

Resumen de contenidos para Metra 99-3011S

  • Página 1 Installation instructions for part 99-3011S APPLICATIONS Table of Contents Chevy Cruze 2011-up (with single color, monochrome screen) 99-3011S Dash Disassembly – Chevy Cruze (with single color, monocrome screen) 2011-up ......2 Kit Assembly KIT FEATURES – ISO DIN radio provision with pocket ...... 3 •...
  • Página 2: Dash Disassembly

    (Figure D) location on radio trim panel of 5. Remove (2) 9/32” screws from the 99-3011S. (Figure A) radio control panel. Disconnect the 2. Using a panel removal tool, gently radio control panel. (Figure E)
  • Página 3: Kit Assembly

    (Figure A) 2. Secure the pocket to the Radio 2. Locate the factory wiring harness Brackets using the supplied (4) in the dash. Metra recommends screws. (Figure A) using the proper mating adapter from Metra or AXXESS. Re-connect 3.
  • Página 4 Installation instructions for part 99-3011S NOWLEDGE IS OWER Enhance your installation and fabrication skills by enrolling in the most recognized and respected mobile electronics school in our industry. Log onto www.installerinstitute.com or call 800-354-6782 for more information and take steps toward a better tomorrow.
  • Página 5: Herramientas Requeridas

    Instrucciones de instalación para la pieza 99-3011S AplicAciones Indice Chevy Cruze 2011 y mas (con un solo color , pantalla monocromática) 99-3011S Desmontaje del tablero – Chevy Cruze (con un solo color, monocrome pantalla) 2011 y mas ......2 Ensamble del kit cArActerísticAs del kit...
  • Página 6: Desmontaje Del Tablero

    99-3011S Desmontaje del tablero 1. Usando una herramienta para 4. Quite los (4) tornillos de 9/32” del quitar paneles, quite con cuidado panel de control de accesorios. el panel de la carcasa de arriba de Jale con cuidado los bordes del la moldura/rejilla del tablero.
  • Página 7: Ensamble Del Kit

    (Figura A) 2. Asegure el bolsillo a los soportes 2. Localice el arnés de cableado de radio utilizando los (4) tornillos de fábrica en el tablero. Metra suministrados. (Figura A) recomienda utilizar el adaptador de acoplamiento adecuado de Metra 3.
  • Página 8 Instrucciones de instalación para la pieza 99-3011S EL CONOCIMIENTO ES PODER NOWLEDGE IS OWER Mejore sus habilidades de instalación y fabricación Enhance your installation and fabrication skills by inscribiéndose en la escuela de dispositivos electrónicos enrolling in the most recognized and respected mobile electronics school in our industry.

Tabla de contenido