Preparation; Assembly Instructions - Kobalt SGY-AIR220 Manual Del Usuario

PREPARATION

Before beginning the assembly of the product, make sure all parts are
present. Compare parts with package contents list. If any part is missing or
damaged, do not attempt to assemble the product.
Estimated Assembly Time: 1 – 3 minutes
Tools Required for Assembly (not included): 9/16 in. or adjustable wrench

ASSEMBLY INSTRUCTIONS

1. Remove the air inlet protective cap from
the air inlet (H) (See Figure 1).
2. Tighten male plug (not included), turning
clockwise with a wrench (not included) for
air tight connection.
DO NOT OVERTIGHTEN.
NOTE
Use threaded sealant tape
(not included) on the threading of the
male plug.
1
2
10
H