Tabla De Contenido; Compressor Requirements - Kobalt SGY-AIR220 Manual Del Usuario

TABLE OF CONTENTS
Compressor Requirements.............................................................................2
Product Specifications....................................................................................3
Safety Information..........................................................................................3
Package Contents..........................................................................................9
Preparation...................................................................................................10
Assembly Instructions...................................................................................10
Operating Instructions..................................................................................12
Care and Maintenance.................................................................................13
Troubleshooting............................................................................................14
Warranty.......................................................................................................15

COMPRESSOR REQUIREMENTS

4.5 90
@
SCFM PSI
Tool Requirements
Exigences relatives aux outils
Requisitos de herramientas
IMPORTANT: To operate correctly, this tool requires airflow that is at least 4.5
cubic feet per minute (SCFM) at 90 pounds per square inch (PSI). Check the
specifications of your air compressor to be sure that it can support both the
minimum SCFM and PSI required. The air hose length could affect how
much air pressure the tool is actually receiving. You may need to adjust the
air pressure higher on the air regulator to achieve the working pressure of
90 PSI.
2