Kobalt SGY-AIR222 Manual De Instrucciones página 11

ASSEMBLY INSTRUCTIONS
3. Place 2 - 3 drops of air tool oil
(not included) into the male plug before each
use (See Figure 3).
The drill needs to be lubricated before
NOTE
each use.
4. Open the claw (C) by turning the chuck (B)
counterclockwise with hand (See Figure 4).
5. Insert a drill bit (not provided) into the
claw (C) and turn the chuck (B) clockwise
by hand. Make sure the drill bit is installed
securely and tightly (See Figure 5).
Only use drill bits which have an RPM rating
equal to or greater than the tool itself.
Before using tool, always make sure
attachments are properly mounted/secured.
If attachments are not properly
mounted/secured, they can present a
serious hazard and may cause bodily injury
for the operator or anyone in or around the
work area. Always follow the manufacturer's
specifications for properly attaching
accessories to tool.
WARNING
3
4
5
11
C
B