Preparation; Assembly Instructions - Kobalt SGY-AIR222 Manual De Instrucciones

PREPARATION

Before beginning assembly of product, make sure all parts are present.
Compare parts with package contents list. If any part is missing or damaged,
do not attempt to assemble the product.
Estimated Assembly Time: 1 – 2 minutes
Tools Required for Assembly (not included):
9/16 in., 3/4 in. or adjustable wrench.

ASSEMBLY INSTRUCTIONS

1. Remove the air inlet protective cap from
the air inlet (F) (See Figure 1).
2. Insert the male plug into the air inlet (F).
Using a 3/4 in. (19 mm) wrench
(not included) hold the air inlet nut (F),
and tighten the male plug by turning it
clockwise using a 9/16 in. (14 mm) wrench
(not included) for an air tight connection
(See Figure 2).
DO NOT OVERTIGHTEN.
NOTE: Use threaded sealant tape
(not included) on the threading of the
male plug.
1
2
10
F
F