Metra 99-7883HG Instrucciones De Instalación página 3

ISO DIN radio provision with pocket
1. Attach the air bag light and hazard
switch to the 99-7883 radio
trim panel.
2. Mount the pocket to the brackets
with the (4) #8 x 3/8" Phillips
screws supplied. (Figure A)
3. Slide the radio into the assembly
and secure with the screws
supplied with the radio. (Figure B)
4. Locate the factory wiring harness
and antenna plug in the dash.
Metra recommends using the
proper mating adapters from
Metra and/or AXXESS.
5. Mount the new radio assembly into
the dash and reassemble the dash
in the reverse order of disassembly
using the 99-7883 radio
trim panel.
99-7883HG
Kit Assembly
(Figure A) (Figure B)
3