Yamaha BEARTRACKER YFM250XR Manual Del Propietário página 268

1. Drain bolt
3. Compression spring
1. Boulon de vidange
3. Ressort de compression
1. Perno de drenaje
3. Muelle de compresión
2. O-ring
4. Oil strainer
2. Joint torique
4. Crépine d'huile
2. Junta tórica
4. Tamiz de aceite
Engine oil replacement and oil filter element
cleaning
1. Place the machine on a level surface.
2. Warm up the engine for several minutes and
stop it.
3. Place a container under the engine to collect
the used oil.
4. Remove the engine oil filler cap and then the
drain bolt to drain the oil.
CAUTION:
_
When removing the drain bolt, the compres-
sion spring, oil strainer and O-ring will fall out.
Take care not to lose these parts.
_
8-15