Lorell LLR19206 Instrucciones De Montaje

Instruction Manual
Drywall Anchors
Phillips Screws
1. Determine where you would like to mount the board.
2. Using a level, lightly draw a horizontal line with a pencil, marking the overall
length of the board size.
3. Measure the center distance of the mounting holes on the board. Take that
measurement and mark on the horizontal line.
4. Drill an appropriate size hole for the fasteners if mounting directly to wood or
studs. Use the wall anchors (included) if mounting into drywall.
5. Carefully pick the aluminum hanger out from the back of the board with a
screwdriver or any appropriate tool as shown in figure A.
6. Place the board on the wall as marked and attached it with screws though holes
into anchors or wall.
BACK VIEW
®
PARTS & QUANTITY
PARTS
MOUNTING INSTRUCTIONS
BACK VIEW
Manufactured in China for S.P. Richards Co., Atlanta, GA
Magnetic Board with Monthly Planner
LLR19206
2 pcs
2 pcs
FRONT VIEW
LLR19206