Automatic Switch Off; Overload Indicator; Environment Friendly Disposal - Sinbo SBS 4423 Manual Del Usuario

When you step off the scale, it will automatically switch off. (If no weighing
is carried out while the zero is being displayed, the scale switches itself off
automatically after approximately 6 seconds.)
When the scale is overloaded (over 150kg), the following will appear on the
screen.
INCORRECT OPERATION WARNING: C
* Placing your scale on a hard, flat surface will ensure the greatest accuracy
and repeatability.
* Always weigh yourself on the same scale placed on the same floor surface.
Uneven floors may affect readings.
* Weigh yourself without clothing and footwear, before meals and always at
the same time of day. First thing in the morning is a good time.
* Your scale rounds up or down to the nearest 100g or 50g if you weigh
yourself twice and get two different readings, your weight lies between the
two.
* Clean your scale with a damp cloth but do not allow water to get inside the
scale.
* Do not use chemical cleaning agents.
* Do not allow your scale to become saturated with water as this can damage
the inner parts.
* Remove the batteries if the scale is not being used for a long time.
* Treat your scale with care, it is a precision instrument. Do not drop it or
jump on it.

ENVIRONMENT FRIENDLY DISPOSAL

You can help protect the environment!
Please remember to respect the local regulations, hand in the
non-working electrical equipments to an appropriate waste
disposal center.

AUTOMATIC SWITCH OFF

OVERLOAD INDICATOR

OL
ADVICE FOR USE AND CARE
- 7 -