Gedore Torcofix Z Instrucciones De Manejo página 12

EN
3
Turn the handle (2) until the
desired torque in the
particular scale (3) N·m or
lbf·ft / lbf·in is identical with
the mark in the reading
glass.
2
3
Make a precise
adjustment of the main
scale using the
micrometer scale (4).
4
Insert the locking button
(1) into the end of the
1
handle (2) again. Care
must be taken to ensure
that the locking button (1)
locks into place correctly.
Only then has the torque
been set correctly.
2
12