Publicidad
Idiomas disponibles
Idiomas disponibles
Step 1. If using the largest
tubing size recommended for
your pump, trim the tubing
adapter using a hacksaw at
the location indicated.
Step 2. Connect the adapter
to the pump, and connect
the tubing to the outlet of the
adapter.
NOTE: Tubing is not included.
Step 3. Place the pump
inside the pump barrier bag.
Pull the drawstring until the
pump barrier bag is fully
closed around the tubing and
power cord. Tie a knot in the
drawstring.
Step 4. Place the pump into
the water and connect to a
properly grounded electrical
outlet.
PUMP PERFORMANCE
52323
Pump Specifications
Max Flow Rate
3,600 GPH at 0 ft. height
Max Pumping Height
18.3 ft. (0 GPH)
Power Consumption
170 watts / 2.5 amps
Cut ring
Adapter before cut
1
Adapter after cut
2
3
4
GFCI
Outlet
3
Publicidad
