Turntable Installation; Countertop Installation; Clock Setting - Hotpoint Ariston MWHA 2022 B Modo De Empleo

Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 164

TURNTAbLE INSTALLATION

Hub (underside)
Glass turntable
Turntable ring support
Turntable spindle
a. never place the glass
tray upside down. The
glass tray should never be
restricted.
b. Both glass tray and
turntable ring support must
always be used during
cooking.
c.
Food
containers must always be
placed on the glass tray for
cooking.
d. If glass tray or turntable
ring
support
breaks,
please
your
nearest
service centre.
COUNTERTOP
INSTALLATION
Remove
packaging
material
accessories. Inspect the
oven for damages such as
and
food
cracks
or
contact
authorized
all
and
dents or broken door. Do
not
install
damaged.
Cabinet:
any protective film from the
microwave oven cabinet
surface.
Do not remove the light
brown mica cover that is
attached
to
cavity
to
magnetron.
OPerAtiOn instrUctiOn
This microwave oven uses modern electronic
controls to adjust cooking parameters and meet
your cooking needs.

cLOck setting

When the microwave oven is Powered ON, the
oven will display "0:00". Buzzer will ring once.
1) Press " kitcHen timer/cLOck ", the hour
figure will flash;
2) Turn the knOb to adjust the hour figures, the
input time should be within 0--23.
3) Press "kitcHen timer/cLOck", the minute
figures will flash.
4) Turn the knOb to adjust the minute figures,
the input time should be within 0--59.
5) Press "kitcHen timer/cLOck" to finish
clock setting. ":" will flash.
note:1) The clock function cannot be used
if the clock is not set.
2) During clock setting, the oven will
automatically go back to the previous
en
if
oven
is
Remove
the
oven
protect
the
eu
hotpoint.
22

Publicidad

Tabla de contenido
loading

Este manual también es adecuado para:

Mwha 2022 x

Tabla de contenido