Descargar Imprimir esta página
HAMPTON BAY 62944 Guía De Uso Y Cuidado

HAMPTON BAY 62944 Guía De Uso Y Cuidado

Lámpara para sendero de luz led y bajo voltaje

Publicidad

Idiomas disponibles

Idiomas disponibles

Enlaces rápidos

PACKAGE CONTENTS
A - Fixture head
for 4 x 4 post
x 1
Assembly and Installation
1
Attaching and installing the light
WARNING: Risk of electric shock do not install the light
within 10 ft. (3.05 m) of a pool, spa or fountain.
□ Connect the male connector (C) with the female connector (E).
Option 1: Installing on 6 x 6 post
□ Put the fixture head (A) with 6 x 6 adaptor (B) (pre-installed) on the 6 x 6
post and attach it with screws.
Option 2: Installing on 4 x 4 post
□ Remove the 6 x 6 adaptor (B) by loosening the screw on the adaptor.
□ Attach the 4 x 4 fixture head on a 4 x 4 post.
E
C
Use and Care Guide
LED Low Voltage Path Light
A
B - 6 x 6 adaptor
(pre-installed)
x 1
6 x 6 Post
4 x 4 Post
C
B
C - Connector
D - Connector with
96 inch wire length
(attached to fixture)
x 1
2
Connecting the wires
□ Detach and place the wire connector (D) on opposite sides of the low
voltage cable (not included) from the transformer (not included) where
the fixture will be located.
□ Align and fit the main low voltage cable vertically in the slot of the wire
connector as shown.
□ Press the wire connector (D) together until it is fully seated and locked
around the cable. Pre-set prongs will pierce the cable insulation and
establish contact. Turn on the power unit. If the light fixture does not
turn on, repeat operations 2 and 3.
□ Once the clip-on connector is in place, we recommend wrapping it in
electrical tape (not included) for additional protection.
D
D
Please contact 1-855-HD-HAMPTON for further assistance.
Item #1005 697 331
D
E - Female connector
(connecting with D)
x 1
x 1
WARNING: The connector contacts (D) have sharp edges
for piercing the main low voltage cable. To avoid injury,
do not touch the metal contacts.
CAUTION: The wire from the low voltage power unit shall
be 12-16 AWG type underground Low Energy Circuit
Cable.
IMPORTANT: Protect the wiring by routing it in close
proximity to the light or next to a building structure such as
a house or deck.
Do not bury the wiring by more than 6 in. (15.24 cm) in order
to connect to the main secondary wire.
Do not submerge fixtures in water.
D
Model #62944
F
E
F - Screw
x 2
HAMPTONBAY.COM

Publicidad

loading

Resumen de contenidos para HAMPTON BAY 62944

  • Página 1 Item #1005 697 331 Model #62944 Use and Care Guide LED Low Voltage Path Light PACKAGE CONTENTS A - Fixture head B - 6 x 6 adaptor C - Connector D - Connector with E - Female connector F - Screw...
  • Página 2 Cable Selection 12 VOLT TAP Cable Length Total Fixture Wattage 0-50 feet 51-100 feet 101-150 feet 0-60 Watts 16 AWG 16 AWG 14 AWG 61-120 Watts 16 AWG 14 AWG 12 AWG 121-180 Watts 14 AWG 12 AWG NOT RECOMMENDED 181-240 Watts 14 AWG 12 AWG...
  • Página 3 Artículo Núm. 1005 697 331 Modelo Núm.62944 Guía de uso y cuidado Lámpara para sendero de luz LED y bajo voltaje CONTENIDO DEL PAQUETE A - Cabezal de la lámpara B - Adaptador de 6 x 6 C - Conector...
  • Página 4 Selección del cable ENCHUFE DE 12 V Longitud del cable Vataje total de la lámpara De 0 a 15.2 metros De 15.5 a 30.5 metros De 30.8 a 45.7 metros De 0 a 60 W Calibre 16 AWG Calibre 16 AWG Calibre 14 AWG De 61 a 120 W Calibre 16 AWG...

Este manual también es adecuado para:

1005 697 331