Operator Mode - Thermo Scientific Premium Serie Manual Del Usuario

Operator Mode

Thermo Scientific
Section 7
Password is used to perform a calibration or to change the circulator's PID
values. It is also used to reset the circulator to factory preset values. To do this
change the circulator's level from the User mode to the Operator mode.
Configuration
Run Time
Messages
next to Password to display:
• Press
Level: User Password
• Press next to Password to display the Change a Value Display.
Change the Password to 1 and press
Level: Operator Password
• The circulator is now in the Operator mode.
Password
System
Password
Password
to display:
Password
7-1