Publicidad

Enlaces rápidos

IN-GROUND
QUICK ADJUST
BASKETBALL SYSTEM
MODEL 1008
BEFORE ASSEMBLY:
• Requires at least 493 lb (224 kg) of cement mix to fi ll a
3
3
volume of 3.7 ft
(0.105 m
).
• Requires 3+ days for concrete to cure, plus 3-4 hours
to complete assembly steps.
• 3+ people recommended for setup.
Save this instruction in the event that the manufacturer has to be
contacted for replacement parts.
TOOLS REQUIRED
Tools not included, unless otherwise indicated
1/2" (13 mm)
(x2)
(x1)
(x1)
493 lb (224 kg)
(x1)
QUESTIONS?
CONTACT LIFETIME CUSTOMER SERVICE:
Call: 1-800-225-3865
7:00 am-5:00 pm (Monday-Friday) MST
and 9:00 am-1:00 pm Saturday MST
(English, French, Spanish)
7/16" (11 mm)
9/16" (14 mm)
(x2)
(x2)
(x1)
(x1)
Cement Mix
Rebar
36" (x1)
Live Chat:
www.lifetime.com/customerservice
(click on "LIVE CHAT" tab)
ASSEMBLY INSTRUCTIONS
Pour le français, voir la page 2. Para el español, ver la página 3.
®
3/4" (19 mm)
(x2)
(x1)
(x1)
(x1)
For Customer Service in Mainland
Europe and the United Kingdom,
E-mail: cs@lifetimeproducts.eu
TABLE OF CONTENTS
Icon Legend................................4
Warnings & Notices....................5
Initial Set Up..............................6
(x1)
Pole Assembly..........................12
Backboard to Rim Assembly.......15
Backboard to Pole Assembly.......19
Parts Identifi er........................i - iv
(x1)
Final Assembly..........................25
Height Adjustment....................31
Maintenance Instructions..........32
Warning Sticker........................33
Registration........................36
Warranty................................37
(x1)
Model Number: 1008
Product ID:

Publicidad

Tabla de contenido
loading

Resumen de contenidos para Lifetime 1008

  • Página 1: Tabla De Contenido

    36" (x1) (x1) (x1) Registration......36 493 lb (224 kg) Warranty........37 (x1) (x1) (x1) Model Number: 1008 QUESTIONS? CONTACT LIFETIME CUSTOMER SERVICE: Product ID: Call: 1-800-225-3865 Live Chat: For Customer Service in Mainland www.lifetime.com/customerservice Europe and the United Kingdom, 7:00 am–5:00 pm (Monday–Friday) MST (click on “LIVE CHAT”...
  • Página 2 Garantie.......38 (x1) (x1) N° de modèle : 1008 ® QUESTIONS ? CONTACTEZ AUX SERVICES À LA CLIENTÈLE LIFETIME Référence du produit : Composer le 1-800-225-3865 t’Chat en direct: Pour nos services à la clientèle du www.lifetime.com/customerservice continent européen et au Royaume-Uni, Du lundi au vendredi 7:00 hr –...
  • Página 3 (x1) (x1) (x1) Número de modelo: 1008 ® ¿PREGUNTAS? PÓNGASE EN CONTACTO CON LOS SERVICIOS DE CLIENTES LIFETIME ID del producto: Para nuestros servicios a clientes Llamar : 1-800-225-3865 Chat en vivo: www.lifetime.com/customerservice en el continente europeo y el Reino De lunes hasta viernes 7:00 hr–17:00 hr (MST)
  • Página 4: Icon Legend

    ICON LEGEND / LÉGENDE DES ICÔNES / LEYENDA DE ÍCONOS • Indicates special heed should be taken when reading. • Ceci indique que vous devez faire attention à ce que vous lisez. • Indica que uno debe prestar atención al leer. •...
  • Página 5: Warnings & Notices

    WARNINGS & NOTICES / AVERTISSEMENTS ET AVIS / ADVERTENCIAS Y AVISOS SAFETY INSTRUCTIONS FAILURE TO FOLLOW THESE WARNINGS MAY RESULT IN SERIOUS INJURY OR PROPERTY DAMAGE AND WILL VOID WARRANTY. Owner must ensure that all players know and follow these rules for safe operation of the system. To ensure safety, do not attempt to assemble this product without following the instructions carefully.
  • Página 6: Initial Set Up

    INITIAL SET UP / PRÉPARATION INITIALE / PREPARACIÓN INICIAL HARDWARE REQUIRED / QUINCAILLERIE REQUISE / HERRAJE REQUERIDO PARTS REQUIRED / PIÈCES REQUISES / PIEZAS REQUERIDAS Metal Parts / Pièces en métal / Piezas de metal ALE (x1) TOOLS REQUIRED / OUTILS REQUIS / HERRAMIENTAS REQUERIDAS 3’...
  • Página 7 SECTION 1 (CONTINUED) / SECTION 1 (SUITE) / SECCIÓN 1 (CONTINUACIÓN) TOOLS AND HARDWARE REQUIRED / OUTILS ET QUINCAILLERIE REQUIS / HERRAMIENTAS Y HERRAJE REQUERIDOS (x1) (x1) • Dig a round hole 21" (54 cm) deep and 18" (46 cm) in diameter. If you live in an area where frost heaves may pose a problem, consult your local building inspector to determine the proper hole depth.
  • Página 8 SECTION 1 (CONTINUED) / SECTION 1 (SUITE) / SECCIÓN 1 (CONTINUACIÓN) TOOLS AND HARDWARE REQUIRED / OUTILS ET QUINCAILLERIE REQUIS / HERRAMIENTAS Y HERRAJE REQUERIDOS (x1) Cement Mélange de béton Mescla de concreto (x1) • Make a mark 14.5" (36.8 cm) from the dimpled end of the Bottom Pole (ALE) (do not scratch the powder coating). •...
  • Página 9 SECTION 1 (CONTINUED) / SECTION 1 (SUITE) / SECCIÓN 1 (CONTINUACIÓN) TOOLS AND HARDWARE REQUIRED / OUTILS ET QUINCAILLERIE REQUIS / HERRAMIENTAS Y HERRAJE REQUERIDOS (x1) • Slide the dimpled end of the Bottom Pole (ALE) into the cement up to the 14.5-inch mark. •...
  • Página 10 SECTION 1 (CONTINUED) / SECTION 1 (SUITE) / SECCIÓN 1 (CONTINUACIÓN) TOOLS AND HARDWARE REQUIRED / OUTILS ET QUINCAILLERIE REQUIS / HERRAMIENTAS Y HERRAJE REQUERIDOS (x1) Cement Mélange de béton (3’) Mescla de concreto • Insert the 1/2" x 3' (15.25 cm x 91.44 cm) rebar (not included) inside the Bottom Pole (ALE). •...
  • Página 11 SECTION 1 (CONTINUED) / SECTION 1 (SUITE) / SECCIÓN 1 (CONTINUACIÓN) TOOLS AND HARDWARE REQUIRED / OUTILS ET QUINCAILLERIE REQUIS / HERRAMIENTAS Y HERRAJE REQUERIDOS Cement Mélange de béton Mescla de concreto • Mix the remaining 1/2 bag of concrete and pour the concrete into the Bottom Pole (ALE) until it is just below the slots in the top of the pole.
  • Página 12: Pole Assembly

    POLE ASSEMBLY / ASSEMBLAGE DU POTEAU / ENSAMBLE DEL POSTE HARDWARE REQUIRED / QUINCAILLERIE REQUISE / HERRAJE REQUERIDO Hardware Bag Sac de quincaillerie Bolsa de herraje ABZ (x2)* ADS (x2)* CIH (x2)* *Only one CIH, ABZ and ADS will be used in this section. The remaining hardware will be used later in the assembly. *Seulement un des CIH, ABZ et ADS sera utilisé...
  • Página 13 SECTION 2 (CONTINUED) / SECTION 2 (SUITE) / SECCIÓN 2 (CONTINUACIÓN) TOOLS AND HARDWARE REQUIRED / OUTILS ET QUINCAILLERIE REQUIS / HERRAMIENTAS Y HERRAJE REQUERIDOS (x1) ADS (x1) CIH (x1) • Align the hole in the bottom of the Top Pole (ALH) with the slot in the top of the Middle Pole (ALF). Secure the Top Pole to the Middle Pole with the hardware shown.
  • Página 14 SECTION 2 (CONTINUED) / SECTION 2 (SUITE) / SECCIÓN 2 (CONTINUACIÓN) TOOLS AND HARDWARE REQUIRED / OUTILS ET QUINCAILLERIE REQUIS / HERRAMIENTAS Y HERRAJE REQUERIDOS (x1) (x1) ABZ (x1) • Strike the end of the Pole Assembly on a piece of scrap wood or cardboard 5–6 times. If the Top and Middle Poles (ALH &...
  • Página 15 BACKBOARD TO RIM ASSEMBLY / ASSEMBLAGE DU PANNEAU À L’ANNEAU / ENSAMBLE DEL TABLERO AL ARO HARDWARE REQUIRED / QUINCAILLERIE REQUISE / HERRAJE REQUERIDO Hardware Bag / Sac de quincaillerie / Bolsa de herraje AAS (x2) AAC (x2) AAB (x2) APK (x1) ABK (x4) ABD (x4)
  • Página 16 SECTION 3 (CONTINUED) / SECTION 3 (SUITE) / SECCIÓN 3 (CONTINUACIÓN) TOOLS AND HARDWARE REQUIRED / OUTILS ET QUINCAILLERIE REQUIS / HERRAMIENTAS Y HERRAJE REQUERIDOS 7/16” (≈11 mm) AAS (x2) ABS (x2) APK (x1) AAB (x2) • Slide the U-Bolt (BNP) through the Left and Right Backboard Brackets (AJJ & AJK). The U-Bolt must rest in the notches of the Backboard Brackets as shown.
  • Página 17 SECTION 3 (CONTINUED) / SECTION 3 (SUITE) / SECCIÓN 3 (CONTINUACIÓN) TOOLS AND HARDWARE REQUIRED / OUTILS ET QUINCAILLERIE REQUIS / HERRAMIENTAS Y HERRAJE REQUERIDOS 1/2” (≈13 mm) AAC (x2) ABK (x4) ABD (x4) • Place the Backboard Bracket Assembly and Rim Support Channel (AOX) to the Backboard (AJI) as shown. •...
  • Página 18 SECTION 3 (CONTINUED) / SECTION 3 (SUITE) / SECCIÓN 3 (CONTINUACIÓN) TOOLS AND HARDWARE REQUIRED / OUTILS ET QUINCAILLERIE REQUIS / HERRAMIENTAS Y HERRAJE REQUERIDOS 3/8" (≈10 mm) ADQ (x2) • Bend the Left and Right Backboard Brackets (AJJ and AJK) outward by hand and position the holes in the Backboard Brackets over the holes in the Backboard.
  • Página 19 BACKBOARD TO POLE ASSEMBLY / ASSEMBLAGE DU PANNEAU AU POTEAU / ENSAMBLE DEL TABLERO AL POSTE HARDWARE REQUIRED / QUINCAILLERIE REQUISE / HERRAJE REQUERIDO Hardware Bag / Sac de quincaillerie Bolsa de herraje 7 1/16” (17.9 cm) AAD (x4) AAX (x4) ABN (x4) 7"...
  • Página 20 SECTION 4 (CONTINUED) / SECTION 4 (SUITE) SECCIÓN 4 (CONTINUACIÓN) TOOLS AND HARDWARE REQUIRED / OUTILS ET QUINCAILLERIE REQUIS HERRAMIENTAS Y HERRAJE REQUERIDOS 3/4" (19 mm) 7 1/16” (17.9 cm) (x2) (x1) AAD (x1) ABL (x2) AAX (x1) • Secure the Short Extension Arms (AKC) to the Backboard Brackets in the location shown with the hardware indicated. •...
  • Página 21 PARTS IDENTIFIER / IDENTIFICATEUR DE PIÈCES / IDENTIFICADOR DE PIEZAS This page intentionally left blank Cette page est intentionnellement laissée en blanc Esta página ha sido dejada en blanco intencionalmente...
  • Página 22 AJI (x1) PARTS IDENTIFIER / IDENTIFICATEUR DE PIÈCES / IDENTIFICADOR DE PIEZAS PARTS IDENTIFIER / IDENTIFICADOR DE PIEZAS / IDENTIFICATEUR DE PIÈCES Metal Parts / Pièces en métal / Piezas de metal ALE (x1) ALX (x1) ALF (x1) Warning Sticker Autocollant d’avertissement Etiqueta adhesiva de advertencia ALH (x1)
  • Página 23 PARTS IDENTIFIER / IDENTIFICATEUR DE PIÈCES / IDENTIFICADOR DE PIEZAS Plastic parts / Pièces en plastique / Piezas de plástico AJI (x1) ALM (x1) AKZ (x1) 7.5' 8.0' 8.5' 9.0' 9.5' BDM (x1) 10.0' BDN (x1) AKP (x1) HARDWARE REQUIRED / QUINCAILLERIE REQUISE / HERRAMIENTAS REQUERIDAS...
  • Página 24 PARTS IDENTIFIER / IDENTIFICATEUR DE PIÈCES / IDENTIFICADOR DE PIEZAS PARTS IDENTIFIER / IDENTIFICADOR DE PIEZAS / IDENTIFICATEUR DE PIÈCES This page intentionally left blank Cette page est intentionnellement laissée en blanc Esta página ha sido dejada en blanco intencionalmente...
  • Página 25 SECTION 4 (CONTINUED) / SECTION 4 (SUITE) SECCIÓN 4 (CONTINUACIÓN) TOOLS AND HARDWARE REQUIRED / OUTILS ET QUINCAILLERIE REQUIS HERRAMIENTAS Y HERRAJE REQUERIDOS • The height measurements on the Outer Guard (BDN) are incorrect for this model. For the correct measurements, place the Height Stickers 7.5' (AKP) included with this unit on the Outer Guard in the positions 8.0'...
  • Página 26 SECTION 4 (CONTINUED) / SECTION 4 (SUITE) SECCIÓN 4 (CONTINUACIÓN) TOOLS AND HARDWARE REQUIRED / OUTILS ET QUINCAILLERIE REQUIS HERRAMIENTAS Y HERRAJE REQUERIDOS 3/4" (19 mm) 7 1/16” (17.9 cm) (x2) (x1) AAD (x1) ABL (x2) AAX (x1) • Insert the Dunk Latch and Outer Guard between the Backboard Brackets (AJJ &...
  • Página 27 SECTION 4 (CONTINUED) / SECTION 4 (SUITE) SECCIÓN 4 (CONTINUACIÓN) TOOLS AND HARDWARE REQUIRED / OUTILS ET QUINCAILLERIE REQUIS HERRAMIENTAS Y HERRAJE REQUERIDOS 9/16" (14 mm) 7" (17,8 cm) 7” (x2) AQW (x1) AAB (x1) • Lift the Dunk Latch (BDL) and Outer Guard (BDN) so the slots line up with the hole in the upper Extension Arms (AKC) closest to the backboard.
  • Página 28 SECTION 4 (CONTINUED) / SECTION 4 (SUITE) SECCIÓN 4 (CONTINUACIÓN) TOOLS AND HARDWARE REQUIRED / OUTILS ET QUINCAILLERIE REQUIS HERRAMIENTAS Y HERRAJE REQUERIDOS 3/4" (19 mm) 7 1/16” (17.9 cm) (x2) (x1) AAD (x2) AAX (x2) ABN (x4) • Align the holes in the Top Pole (ALH) to the holes in the end of Extension Arms (AKC).
  • Página 29 FINAL ASSEMBLY / ASSEMBLAGE FINAL / ENSAMBLE FINAL HARDWARE REQUIRED / QUINCAILLERIE REQUISE / HERRAJE REQUERIDO Hardware Bag / Sac de quincaillerie / Bolsa de herraje ADS (x1)* ABZ (x1)* CIH (x1)* *This Hardware taken from the hardware bag used in Section 2 *Cette quincaillerie vient du sac de quincaillerie utilisé...
  • Página 30 SECTION 5 (CONTINUED) / SECTION 5 (SUITE) SECCIÓN 5 (CONTINUACIÓN) TOOLS AND HARDWARE REQUIRED / OUTILS ET QUINCAILLERIE REQUIS / HERRAMIENTAS Y HERRAJE REQUERIDOS (x3) • BEFORE CONTINUING: It is critical that the instructions in the following steps are followed exactly. Failure to properly orient and align the pole sections will render the pole unusable.
  • Página 31 SECTION 5 (CONTINUED) / SECTION 5 (SUITE) SECCIÓN 5 (CONTINUACIÓN) TOOLS AND HARDWARE REQUIRED / OUTILS ET QUINCAILLERIE REQUIS / HERRAMIENTAS Y HERRAJE REQUERIDOS (x1) ADS (x1) CIH (x1) • Align the hole in the Middle Pole (ALF) with the slot in the Bottom Pole (ALE) and slide the Middle Pole over the Bottom Pole. Insert a Screw (ADS) through a Domed Countersink Washer (CIH), into the small hole in the Middle Pole, and into the slot in the Bottom Pole as shown.
  • Página 32 SECTION 5 (CONTINUED) / SECTION 5 (SUITE) SECCIÓN 5 (CONTINUACIÓN) TOOLS AND HARDWARE REQUIRED / OUTILS ET QUINCAILLERIE REQUIS / HERRAMIENTAS Y HERRAJE REQUERIDOS (x1) x(1) (x1) • While two people continue to hold the assembly in place, set the Wood Block on top of the Pole and strike it fi...
  • Página 33 SECTION 5 (CONTINUED) / SECTION 5 (SUITE) SECCIÓN 5 (CONTINUACIÓN) TOOLS AND HARDWARE REQUIRED / OUTILS ET QUINCAILLERIE REQUIS / HERRAMIENTAS Y HERRAJE REQUERIDOS (x1) ABZ (x1) (x3) • Secure the Middle Pole (ALF) and Bottom Pole (ALE) together with one Screw (ABZ). Then insert the Pole Cap (ALM) to the Top Pole.
  • Página 34 SECTION 5 (CONTINUED) / SECTION 5 (SUITE) SECCIÓN 5 (CONTINUACIÓN) TOOLS AND HARDWARE REQUIRED / OUTILS ET QUINCAILLERIE REQUIS / HERRAMIENTAS Y HERRAJE REQUERIDOS (x3) • Attach the Net (AKZ) to the Rim (ALX). • Attachez la fi let (AKZ) à l’anneau (ALX). •...
  • Página 35: Ajuste De Altura

    HEIGHT ADJUSTMENT / RÉGLAGE DE LA HAUTEUR / AJUSTE DE ALTURA The basketball system may be adjusted from 8 feet to 10 feet. ONLY ADULTS SHOULD ADJUST THE HEIGHT OF THE SYSTEM. To Raise the Hoop: • Place the end of a long object, such as a broom handle, under the Rim and push upward. To Lower the Hoop: •...
  • Página 36: Mantenimiento

    MAINTENANCE / ENTRETIEN / MANTENIMIENTO The life of your basketball system depends on many variables. The climate, exposure to corrosives such as salt, pesticides, or herbicides, and excessive use or misuse can all contribute to pole failure, which may cause property damage or personal injury. Check your basketball system frequently for loose hardware, excessive wear, and signs of corrosion.
  • Página 37: Autoadhesivo De Advertencia

    Son mécanisme a été conçu uniquement pour soutenir le poids du panneau et de l’anneau. N’accrochez rien au manche, à l’anneau, au panneau ni aux leviers sous peine d’endommager l’équipement et d’annuler la garantie. Lifetime Products, Inc., Clearfield, UT 84016 www.lifetime.com 7/12/2016 # 1176611...
  • Página 38 NOTES / REMARQUES / NOTAS...
  • Página 39 NOTES / REMARQUES / NOTAS...
  • Página 40 REGISTER today! ENREGISTREZ VOTRE PRODUIT EN LIGNE AU WWW.LIFETIME.COM Chez Lifetime®, nous nous engageons à fournir des produits innovateurs de qualité. Lors de votre inscription, vous aurez l’occasion de nous faire parvenir vos commentaires. Votre opinion est importante pour nous.
  • Página 41 2. This warranty is nontransferable and is expressly limited to the repair or replacement of defective product. If the product is defective within the terms of this warranty, Lifetime Products, Inc. will repair or replace defective parts at no cost to the purchaser.
  • Página 42 6. Cette garantie remplace expressément toutes autres garanties, expresses ou tacites, y compris les garanties de commercialisation ou d’adaptation à un but particulier dans la mesure permise par les lois fédéraux et des états. Ni Lifetime Products, Inc. ni aucun de ses représentants n’assure aucune autre responsabilité concernant ce produit. Cette garantie vous accorde des droits particuliers, et vous aurai peut-être des autres droites qui varient d’un état à...
  • Página 43: Garantía

    NO ESTÁN DISPONIBLES O SON OBSOLETAS. 1. El comprador original recibe la garantía de que los sistemas de basquetbol Lifetime estarán libres de defectos de material o de mano de obra por un período de cinco años a contar desde la fecha de la compra original. La palabra “defectos” se defi ne como imperfecciones que perjudican el uso del producto.
  • Página 44 7:00 am–5:00 pm (M–F) MST and 9:00 am–1:00 pm Saturday MST ® AMÉLIORER L’ACHAT LIFETIME EN AJOUTANT DES ACCESSOIRES OU D’AUTRES PRODUITS ® Pour acheter des accessoires ou des autres produits Lifetime , visiter le : www.lifetime.com (Anglais seulement) Ou composer le 1-800-424-3865 Du lundi au vendredi de 7 h à...

Este manual también es adecuado para:

Quick adjust 1008

Tabla de contenido