Virutex EB140 Guía Rápida De Puesta En Marcha página 7

5. In case the motor turned in the opposite direction it will
be no possible to introduce the panel. Modify the connection
following section 4.5 on the instructions manual.
10) Operation mode with temperature:
• Press icon (18) on the welcome screen.
• Press the "ON" button (10) from the welcome screen.
26. Temperature set by the user.
27. Real temperature of the glue.
28. Back.
26
29. Heating indicator.
28
27
29
- Temperature selection:
Pressing on the temperature set by the user (27) it will appear
a keyboard.
Introduce the wished temperature and press enter.
Once the temperature has been selected press the "ON" but-
ton (10) to start the heating.
- While the glue is heating up:
On the screen is showed the current temperature and the
expected time to arrive to the set temperature.
EB140 / Quick start guide - 7