Correct Purpose Of Use; Incorrect Purpose Of Use - hafele WT 210 Instrucciones De Montaje

2.2 Correct purpose
of use
2.3 Incorrect purpose
of use
26
Special safety notes
To draw attention to special risks, the following symbols are used in the safety notes:
Warning sign
This symbol highlights useful tips and recommendations
and information for efficient and problem-free operation.
Other markings
The following markings are used in these instructions to highlight action instructions,
results, lists, references and other elements:
1.>, 2.>, 3.>

•
[push button]
The WT 210 / WT 210 BLE is intended exclusively for use in an access control
system.
Correct purpose of use also includes observing all specifications contained in these
instructions.
WARNING
Danger in case of improper use!
Improper use of the wall terminal, the controller and the add-on modules
can result in dangerous situations.
• Never install the WT 210 / WT 210 BLE in ambient conditions other
than those permitted.
Any use beyond or other than the correct purpose of use shall be deemed improper
use.
Any use that is not mentioned in chapter 2.2 is considered to be improper.
The operator is solely responsible for any resulting damage. It is particularly
important to avoid the following:
• Use without emergency opening facility
• use in potentially explosive environments
• Use in the vicinity of electromagnetically sensitive devices
• Use in aggressive environments (containing salt or chlorine, for example)
• Omitting components during installation
• Changes to the installation order
• Use of non-original parts
• Use of defective or damaged components
• modifications or repairs to the product
Type of risk
Warning of dangerous electrical voltage
Warning of a hazardous area
Step-by-step action instructions
Results of action steps
Lists without a defined order
Controls (e.g. push buttons, switches), display
elements (e.g. signal lamps)