Breaking In (Running In) Engine - Yamaha 225G Manual Del Propietário

EMU01176
BREAKING IN (RUNNING IN)
Your new engine requires a period of
break-in (running-in) to allow mating sur-
faces of moving parts to wear-in evenly.
Correct break-in (running-in) will help
ensure proper performance and longer
engine life.
cC
8 Failure to follow the break-in (running-
in) procedure may result in reduced
engine life or even severe engine dam-
age.
8 Premix fuel must be used during break-
in (running-in) in addition to oil in the
Yamaha Autolube System.
8 After break-in (running-in), use gaso-
line(petrol) only. If premix fuel is used
continually, the oxygen sensor for Elec-
tronic Fuel Injection system could be
damaged.
Break-in (running-in) time:10 hours
Break-in (running-in) premix ratio
Gasoline (petrol) : Engine oil=50 : 1
EMF52010
Gasoline (Petrol)/ Engine oil mixing chart
Mixing
ratio
1 L
Gasoline
(0.26 US gal,
(Petrol)
0.22 Imp gal)
0.02 L
Engine oil
(0.02 US qt,
0.02 Imp qt)
3-9
ENGINE
50 : 1
12 L 14 L
(3.2 US gal, (3.7 US gal,
2.6 Imp gal) 3.1 Imp gal)
0.24 L 0.28 L
(0.25 US qt, (0.30 US qt,
0.21 Imp qt) 0.25 Imp qt)
GB
24 L
(6.3 US gal,
5.3 Imp gal)
0.48 L
(0.51 US qt,
0.42 Imp qt)