Tripp-Lite UPB-10K0-2U1C El Manual Del Propietario página 5

Power Bank Charging Instructions
Notes:
• A power button is located on the side of the power bank. When pressed
once, the LEDs will illuminate to indicate the power bank's remaining
battery capacity. When all devices are disconnected, the power bank will
stop any device charging taking place.
• When charging the power bank, the LEDs will illuminate to indicate the
battery capacity level (see table below):
LED Status
●●●●
●●●◎
●●◎○
●◎○○
◎○○○
● = LED Illuminated
○ = LED Off
◎ = LED Flashing
1. Using the included USB Type-C cable, connect the In/Output USB
Type-C port on the power bank to the appropriate USB port on
your computer or USB Charger.
2. The power bank will begin charging, with the LEDs operating per
the above notes and table.
Power Bank Battery Capacity
100%
75% - 99%
50% -74%
25%-49%
1% - 24%
5