Safety Regulations; Legend; Safety Precautions - SCANMASKIN 28 WS Manual

2.

Safety Regulations

Read this entire chapter carefully! Failure to comply with safety regulations may result in
serious injuries or damages.

Legend

2.1
Notation regarding safety
Notation regarding electrical safety
Notation regarding safety during transport
Tipping hazard
See reference

Safety precautions

2.2
Any machine, if it is not used according the regulations, may be hazardous for operating, set-
ting-up and service personnel. The operating authority is responsible for compliance with
the safety regulations during operation and maintenance, and for the use of safety devices
supplied with the machine, as well as the provision of appropriate additional safety devices!
Eye and ear protection must be worn at all times.
Never operate the machine when it's not in its upright position.
Make sure there is no debris in the work area.
Check the work area for screws or other hard objects in the concrete. Don't use the ma-
chine if there are any foreign objects stuck into the surface. Such objects must be removed
prior to operation of machine.
Read "2.3Organizational measures" and "2.5Safety regarding operation of machine"
80
thoroughly before operation!
www.scanmaskin.com