Adjusting Grinding Speed; Change Grinding Direction On A Standard Machine; Changing Grinding Direction On A Rc Machine; Safety Off Position - SCANMASKIN 28 WS Manual

SCANMASKIN 32 WORLD SERIES

Adjusting grinding speed

4.6
Turn the "SPEED" knob (3) clock wise to increase the grinding speed and counter clock wise to
decrease it. See "1.2Mechanical specifications" for the rotation speed range.

Change grinding direction on a standard machine

4.7
Use the "L/R" switch (1) to select grinding direction. The machine will automatically come to a
complete stop and restart in the selected direction.

Changing grinding direction on a RC machine

4.8
Use the symbols
complete stop and restart in the selected direction.

Safety off position

4.9
When working on the machine, either maintenance or tool change, the machine must be set to
the "Safety off position". See "2.7Definition of the "Safety off position"" for further information.

Grinding

4.10
Refer to "Grinding guide" for instructions and information about grinding.

Navigate the "HMI" on a RC model

4.11
 Make sure that the power plug is connected to the machine.
 Engage the main switch to power up the HMI screen.
 Follow the steps below for a fast startup:
www.scanmaskin.com
, to select grinding direction. The machine will automatically come to a
ENGLISH
91