Rockwell Sonicrafter F80 Manual De Instrucciones página 10

OSCILLATING TOOL
APPLICATION
WARNING: The sawing teeth are very sharp. Do not touch during mounting and application. Excess vibration in
the workpiece will reduce the tool's working efficiency significantly.
The workpiece must be clamped tightly before it is cut.
Universal Fit accessories available from Rockwell
TM
Work with all major brands of oscillating tools.
Sawing
Sanding
Rasping
Removing
grout
Scraping
NOTE: When plunging and sawing use a slight pendulum motion, to allow sufficient chip removal.
The saw blade lasts longer if the wear is distributed evenly. To ensure an even distribution, loosen the saw blade,
rotate it and retighten firmly.
Cut/Sand with a constant movement and light pressure.
Heavy pressure does not increase the cut/removal rate – the accessory merely wears faster.
10
Pic
EXTENDED LIFE CARBIDE
EXTENDED LIFE Bimetal Metal/
Wood End Cut Blade
Precision Wood Cut Blade
Wood End Cut Blade
HSS Semicircle Saw Blade
Sanding Pad (Perforated)
Sanding Finger Pad
Triangular Carbide Grit Rasp
Carbide Rasp (Finger Shaped)
Carbide Grit Semicircle Saw
Blade
Diamond-Coated Semicircle
Saw Blade
Rigid Scraper Blade
Flexible Scraper Blade
Name
Metal, hardened nails and screws, tile,
rebar, cement backer board and other
heavy duty applications
Wood, plastic, fiberglass, nails, non-ferrous
metals, thin sheet metal, hardened fillers
Fast Cuts in wood, plastics
Wood, plastic, drywall
Thin wood, plastic, fiberglass,
non-ferrous metals, thin sheet metal,
hardened fillers, window glazing.
Wood, plastic, hardened fillers.
Wood, plastic, hardened fillers.
Wood, hardened adhesives, thin set,
masonry.
Wood, hardened adhesives, thin set,
masonry.
Grout, porous concrete, masonry.
Ceramic and stone tile, backerboard.
Old paint, hardened adhesives, caulk, carpet.
Elastic sealants, paint, adhesive residues,
carpet.
ENG
Application