Yamaha Soavo-1 Manual De Instrucciones página 4

<
Bi-wired connections
To connect the speaker to the
output terminals of the amplifier, two
pairs of cables for each of the
woofer and the tweeter/mid-range
are used instead of standard
connections. This type of
connection decreases the
modulation distortion caused by
electric resistance of the cables and
driving current of the speakers.
Consequently, purer sound quality
can be expected.
To utilize bi-wired connections,
remove the jumper cables from the
terminals first, and then connect the
woofer and the tweeter/mid-range
to the amplifier separately using two
pairs of cables.
When using a banana plug
1
Unscrew the terminal knob.
2
Remove the cover by pulling it toward you.
4
En
>
When your amplifier has only one
set of speaker output terminals.
Soavo-1 (R)
2
1
Amplifier
SPEAKERS
R L
+ – – +
Soavo-1 (L)
Remove the jumper
cables before
connecting.
Black (–)
Jumper
cable
3
Tighten the terminal knob.
4
Simply insert the banana plug into the terminal.
Banana plug
When your amplifier has two sets
of speaker output terminals.
Both SPEAKERS A and B
should be selected.
Amplifier
SPEAKERS
R
+ – –
Soavo-1 (R) Soavo-1 (L)
Tweeter/Mid-range
terminals
Red (+)
Woofer terminals
3
4
L
A
+
B