Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
OPERATING MANUAL
Hö t-Steam
SGB
®
B. OPERATION & USE
IMPORTANT
Initially, you may see water leaking out of the iron. This is not an iron
malfunction. It may take few seconds to heat and evaporate the remaining
condensation from previous use.
1. Place the Gravity Feed Iron on the Iron Rest.
2. Open the Water ControlValve
3. Plug in the Power Cord and turn ON the Power Switch.
4. Set the Temperature Dial to the desired temperature level.
5. Wait until the Heat Indicator Light turns OFF.
6. Press the Thumb Switch a few times to push away any remained air inside
the hose.
7. Start pressing.
Heat Indicator Light Operating Functions
The light on the Power Switch operates as a Heat Indicator Light and it won't stay
ON all the time.
When light is ON:
set on the Temperature Dial.
When light is OFF:
set on the Temperature Dial.
PRESSING WITH PROFESSIONAL RESULTS
When light is ON:
When light is OFF:
method (Press 1 second and release) for best results.
Do not hold the Thumb Switch for a long period of time or consequently
the iron will start releasing a mix of water and steam discharge.
Iron Temperature Range
Dial Scale
1
2
3
4
5
Series-Model No. SGB600, SGB700, SGB800 & SGB900
The iron is heating up to the desired temperature range
The iron has reached its desired temperature range
Do not press the Thumb Switch, the iron is re-heating.
Press on the Thumb Switch with a touch-and-release
Temperature
o
o
80C
176F
o
o
110C
230F
o
o
140C
284F
o
o
170C
338F
o
o
210C
410F
*** Actual scale and temperature range may vary ***
(Turn counterclockwise).
Range
Recommended Fabrics
Low
Silk and delicate fabric
o
o
(80C
~120C
)
Medium
o
o
(140C
~160C
)
High
Linen, Yarn & thick fabric
o
o
(180C
~210C
)
Cotton and Wool
3
Publicidad
Tabla de contenido
