Ottobock 9E420-L Instrucciones De Uso página 26

10.3 AutoControl LowInput control with 2 electrodes
The prosthetic component closes at proportional speed, and the grip force increases proportion-
ally with the duration of gripping.
The gripping strength can be adjusted via the 560X3=* MyolinoSoft software.
at constant speed by a muscle signal at any level exceeding the ON threshold of
Opening:
the OPENING electrode.
Proportionally controlled by the CLOSING electrode.
Closing:
Program
AutoControl Sustained electrode signal
LowInput
Speed
constant
10.4 Digital control with 2 electrodes
The prosthetic component closes at constant speed. The grip force increases proportionally to the
duration of gripping. The OPEN/CLOSE speed and the grip force build-up speed can be adjusted
using the MyolinoSoft 560X3=* software.
The gripping strength can be adjusted via the 560X3=* MyolinoSoft software.
Digitally; signal on the OPENING electrode opens the prosthetic component at
Opening:
constant speed.
Digitally; signal on the CLOSING electrode closes the prosthetic component at
Closing:
constant speed.
Program
Digital Sustained electrode signal
Speed
constant
10.5 VarioControl using 1 electrode
INFORMATION
For this control mode, an electrode must be connected to input1.
With this control mode, the OPENING speed is determined by the speed and strength of the mus-
cle contraction. The CLOSING speed and grip force depend on the reduction of muscle tension.
The gripping strength can be adjusted via the 560X3=* MyolinoSoft software.
26 | Ottobock
OPEN
Sustained electrode signal
Grip force: Time proportional
Reduced proportionality
range: maximum speed once
LOW threshold has been
reached.
Speed
proportional
OPEN
Sustained electrode signal
Grip force: Duration of the
signal
Speed
constant
CLOSE
CLOSE
Indications
For patients with
2 weak electrode
signals.
Indications
For patients with
2 weak electrode
signals.
9E420=L, 9E420=R