Setting Up Your Device - Fisher & Paykel SleepStyle Auto Guía De Uso Y Cuidado

2.2 SETTING UP YOUR DEVICE

1. Place the device below head height on a stable
and level surface, like a bedside table.
Warnings
To avoid injury, choking, or inhalation of a foreign object:
Do not place the device above head height to prevent
water from entering the breathing tube.
2. Connect the power cord and the breathing
tube.
Connect the power cord into the power inlet of the device.
Connect the other end of the power cord into a power
outlet.
Warnings
To avoid electric shock:
Do not use if the device, power cord, or accessories are
damaged, deformed or cracked.
To avoid choking, or inhalation of a foreign object:
Ensure the breathing tube and power cord, including
any extension cords, are correctly positioned so they will
not become entangled with the body or furniture during
sleep.
Breathing tube
Connect your breathing tube into the air outlet.
ThermoSmart breathing
tube
Note: Make sure the connectors on the ThermoSmart
breathing tube click into position with the ThermoSmart
connection.
If you have connected the ThermoSmart breathing tube
correctly, the ThermoSmart icon
home screen.
Warnings
To avoid incorrect therapy:
Use the elbow when rotating the ThermoSmart breathing
tube. Incorrect handling may damage the tube.
3. Remove the water chamber from the device.
Press the lid latch and open the device lid. Take the water
chamber out of the device.
ENGLISH
Standard breathing tube
will appear on your
A-7