Troubleshooting; Replacement Parts - EQUIPRITE Insta-Lift 5100788 Instrucciones De Funcionamiento Y Manual De Piezas

TROUBLeSHOOTInG

Symptom
Jack will not lift load
Jack will lift, but not maintain
pressure
Jack will not lower after unloading
Poor lift performance
Will not lift to full extension

RePLaCeMenT PaRTS

(refer to page 6 & 7)
Not all components of the jack are replacement items. When ordering parts, give Model number, serial number and
parts description. Call or write for current pricing: Fastenal, 4730 Service Dr., Winona, MN 55987, U.S.A. Or contact
your local Fastenal Representative or visit www.fastenal.com to locate your nearest store.
Possible Causes
• Release valve not tightly closed
• Load is too heavy
• Release valve not tightly closed
• Hydraulic unit malfunction
• Reservoir overfilled
• Linkages binding
• Fluid level low
• Fluid level low
• Hydraulic unit malfunction
• Fluid level low
5
Corrective action
• Ensure release valve tightly closed
• Consider higher capacity jack
• Ensure release valve tightly closed
• Discontinue use, contact your local
Fastenal Representative or visit
www.fastenal.com to locate your
nearest store
• Drain fluid to proper level
• Clean and lubricate moving parts
• Ensure proper fluid level
• Ensure proper fluid level
• Discontinue use, contact your local
Fastenal Representative or visit
www.fastenal.com to locate your
nearest store
• Ensure proper fluid level