Installation And Wiring; Select A Proper Location - Boer Temper Koban KDP9 360 mini Manual Del Usuario

KDP9
Mini presence detector

Installation and wiring

WARNING
Please disconnect power
completely and read the entire
instruction manual carefully before
installation.

Select a proper location

It is recommended to install at
the height of 2.5m. The detection
range can reach up to a circular of
6m diameter (See FIG.2-A). Please
refer to following detection pattern
at different mounting height (See
FIG.2-B).
Side view
3m 1 5 .
Top view
360 o
FIG.2-A
Instructions manual |
0 1 5 . 3m
Φ6m
Φ3m
20
Φ5.6m
Φ6m
Φ7m
Φ8m
Φ9m
Φ10m
Φ11m
FIG.2-B
Pay attention to the walking
direction in the test proceeding, the
detection area cross to detector is up
to Φ6m, and frontal to detector is
Φ4m (See FIG.3).
More sensitive to movement
across the pattern
Φ6m
FIG.3
Helpful tips for installation
Since the detector is in response to
temperature change, please avoid
the following conditions (See FIG.4-A
& FIG.4-B):
• Avoid the detector towards
the objects whose surfaces are
highly reflective, such as mirror,
monitor, etc.
• Avoid the aiming towards the
objects which may be swayed
in the wind, such as curtain, tall
plants,miniature garden, etc
www.grupotemper.com
Less sensitive to movement
directly towards detector
Φ4m