External body and baskets in AISI304 steel.
-
-
Lid in stainless steel, hinged and spring balanced in all opening positions, equipped
with a safety device which allows the opening only when the basket stands still.
-
The apparatus is equipped with an emergency button which is situated on the front of
the machine and which allows to cut out the power supply in case of any irregular
operation.
-
The apparatus is equipped with a control board for wall fitting which must be easy to
reach for the operator.
1.4. LAWS, TECHNICAL PRESCRIPTIONS AND
When installing the appliance it is necessary to follow and comply with the following
regulations:
− current regulations on the matter;
− any hygienic-sanitary regulations concerning cooking environments;
− municipal and/or territorial building regulations and fire prevention prescriptions;
− current accident prevention guidelines;
− electricity board regulations concerning safety;
− the regulations of the electrical power supply company or agency;
− any other local prescriptions.
1.5. SPECIAL REQUIREMENTS FOR THE
− The room in which the appliance is to operate must be well ventilated.
− Current regulations require the installation of a multiple pole switch between the
appliance and the electrical power supply; the switch must have a contact gap of least
3 mm on each pole.
Warning! : The electrical isolating switch must both be located near to the
appliance, within easy reach for the user.
Instruction manual for installation, maintenance and use
Centrifuge DRC 700V
1.3. CONSTRUCTION
DIRECTIVES
INSTALLATION SITE
DRC700V-GB-00
Page
6 di 21