Cleaning And Care Of The Appliance; Daily Cleaning - Cadorin DRC 700V Manual De Instrucciones Para La Instalación, La Manutención Y El Uso

3.3. CLEANING AND CARE OF THE APPLIANCE

− Do not use aggressive substances or abrasive detergents when cleaning the stainless
steel components.
− Avoid using metal pads of the steel parts as they may cause rust. For the same reason
avoid contact with materials containing iron.
− Do not use sandpaper or abrasive paper for cleaning; in special cases use a powder
pumice stone.
− In case of particularly resistant dirt, it is advisable to use abrasive sponges (e.g.
Scotch-Brite).
− It is advisable to clean the appliance only once it has cooled down.
Warning! : When cleaning the appliance never use direct jets of water to prevent
infiltration of the liquid and damage to components.
Warning! : Before proceeding to any cleaning operation, make sure that the
apparatus is not connected to the mains.
− For a careful cleaning of the counterbasket and of the internal plating of the apparatus,
please carry out the following operations:
o Take out the basket;
o Clean the internal plating with a wetted cloth and make sure you do not spill any
water on the motor.
o After the cleaning carefully re-assemble the counterbasket, make sure that the feet
of the support are placed in their seats and then fasten the knurled tap tightly in its
seat.
− Clean the cooking vat with water and a detergent, rinse thoroughly and dry well with a
soft cloth.
− External surfaces should be washed down using a sponge, and hot water with a
suitable proprietary cleaner addend.
− Rinse always thoroughly and dry with a soft cloth.
− Make sure that the outlet pipe is not obstructed by elements which might prevent
the regular outflow.
Instruction manual for installation, maintenance and use
Centrifuge DRC 700V

3.3.1. DAILY CLEANING

DRC700V-GB-00
Page
15 di 21