C
ARE & MAINTENANCE
For best results, it is important to periodically check and care for the filters and spray arms.
Cleaning metallic parts
With a cloth or sponge, you can clean some parts
such as exterior or interior parts.
Stainless steel tub has a tendency to build up cloudy
film on its surface especially when using hard water.
Cleaning Spray Arms
- Lower Spray Arm
�Check that the water jet holes are not blocked by
food particles.
�When cleaning is necessary, remove the Spray
arm by pulling up.
�Clean the spray arm and replace it pushing down.
- Upper Spray Arm
�Pull the upper rack forward. Make sure the water
jet holes are not blocked by food particles.
�When cleaning is necessary, remove the arm by
unscrewing the nut.
�Clean the spray arm and replace it in the reverse
order. Make sure the nut is tight!
- Top Spray Arm
�Make sure the water jet holes are not blocked by
food particles.
�When cleaning is necessary, remove the arm by
disassembling the hook from the bracket which
holds the Top Spray Arm assembly to the tub.
�Clean the spray arm and replace it.
Maintenance by seasons
- To prevent possible problems, be sure to follow
procedures below.
- During the summer season If you are absent for
extended periods of time,it is recommended that
you close the water valve and unplug power cord.
- During the winter season, if room temperature
where dishwasher is located is exposed to
freezing,it is recommended that you winterize the
water supply lines and product itself.
15