Skiddoü Moss Manual De Usuario página 29

pushchair backrest (fig. 12a).
13. Buggy locking mechanism (Fig. 13):
• Press the brake pedal outwards to lock the wheels. Press the brake pedal in the opposite
direction to release the lock (as indicated by the arrow).
14. Handle height adjustment (Fig. 14):
• Press the button on the handle and pull it in the desired direction to adjust the height as
required.
15. Buggy folding (Fig. 15):
a. Pull and hold the lever provided in the seat backrest.
b. Tilt the backrest fully forward, as shown in the figure.
c. Press and hold the handle button.
d. Tilt the handle fully forward (as shown in the figure).
e. Push the handle down, as indicated by the arrow, so the buggy starts folding.
f. The buggy is folded correctly when the plastic latch on the side is locked and a "clicking"
sound is heard.
g. The buggy may be carried conveniently using the special handle.
16. Front wheel locking (Fig. 16):
• In order to lock the rotation of front wheels, move the slider present above the wheel, at the
bottom of the stroller, towards the middle. Do the above at both front wheels Move the lock
in the opposite direction to release the wheels.
17. Front wheel removal (Fig. 17):
• Press the small metal button located above the wheel, at the bottom of the stroller, using a
screwdriver and pull the wheel to remove it.
18. Rear wheel removal (Fig. 18):
• Press the button located at the bottom of the wheel socket and pull the wheel to remove it.
19. Mosquito mesh, rain cover and footrest cover assembly (Fig. 19):
• Place the mosquito mesh/rain cover/footrest cover on the exposed part of the buggy and
attach it to the plastic buttons present at the sides of the roof.
20. Carry cot opening (Fig. 20):
• Pull the handle of the carrycot up.
• In order to adjust and lock the base open, move the sliders away from the middle by
pressing both inner buttons simultaneously (Fig. A), until they lock at the extreme ends of the
base (Fig. B).
21. Cover (Fig. 21):
• Place the cover on the carry cot and do the zip around the cover.
22. Handle (Fig. 22):
• The handle is locked only in the vertical position (Fig. A). To lower the handle, press both
side buttons present inside the carry cot simultaneously (Fig. b). The handle is useful when
carrying and installing the carrycot on the frame (Fig. C).
23. Rocking position (Fig. 23):
• The base of the carrycot is shaped such that the child placed in the carrycot, on an even
surface, may be rocked.
24. Sleeping position (Fig. 24):
• The rocking function may be locked by protracting four feet provided under the base of the
carrycot.
25. Backrest adjustment (Fig. 25):
• The backrest may be adjusted in three positions. To change the tilt angle of the backrest,
set the metal support provided under the cushion in the desired position (as shown in the
figure).
26. Carry cot folding (Fig. 26):
• The carry cot may be folded to make it smaller. Press and push the slider protrusions under
the gondola base (Fig. A) and move them simultaneously towards the middle of the base (Fig.
B).
• Move the handle down, simultaneously pressing two side buttons provided inside the carry
cot.
27. Carry cot assembly on the buggy frame (Fig. 27):
• To assemble the carry cot, put it on the frame and press with both hands, until a click is
heard.
28