Where To Use; Features - ENJOYABLE WARMTH SMART BIO SF Serie Manual Del Usuario

Owner's manual
operations with other bio-ethanol burners is spilling during filling. The SF-
xxx-x series has got an automated filler system, which ensures no fuel is
spilled, and the tank is not over-filled.
Since there are no toxic waste products, the burner can be installed
anywhere, without requiring an exhaust system. And because it can be
easily filled by means of a jerry can, it also doesn't require a gas line either.
This gives you optimal flexibility for placing the burner.
Since any fuel uses oxygen to burn, the bio-ethanol burner also uses
oxygen. If the room would be fully closed, this would mean the oxygen
would be used up. Therefore, some ventilation needs to be in place: either
through a window, through a mechanical ventilation system or by other
means. In the unlikely case that not enough oxygen can be provided, the
burner will shut itself down because it has got a built-in CO2 safety sensor.

1.3. Where to use

The SF-xxx-x bio-ethanol burner can be placed anywhere where there is
electricity (to power the fuel pump and its control unit). It needs to be
installed in a dry place, with at least 20cm free space to each side, and
50cm free space above the burner. When using it outside, make sure the
burner cannot get wet, and that the power remains connected at all times.

1.4. Features

The SF-xxx-x bio-ethanol burner is available in lengths from 61cm up to
210cm (with custom sizes and more lengths available as customization
option). Its features are listed below:
•
Nice design: can be included in any design you like
•
Nice flames: yellow flames due to computerized fuel supply
SF-xxx-x series bio-ethanol burner
Page 5 / 181 Version 1.3