Installation Requirements; Mounting Options - ENJOYABLE WARMTH SMART BIO SF Serie Manual Del Usuario

Owner's manual
•
Refilling the burner is best done with the hose and automatic
filling system. If manually filling, always use a funnel.
•
Never fill the unit while it's burning or it's still hot – allow at least
30 minutes after shutting down the burner for the fuel tray to cool
down.
•
Spilled ethanol must be removed with an absorbent tissue and
cleaned with water in order to prevent ignition outside the burner
reservoir.
•
Do not smoke while filling the burner.
•
Always have a fire extinguisher in the proximity of the fireplace.
•
Store any fuel containers away from the burner and any other heat
source.
•
Never try to blow out the flame in order to put it out – this
provides additional oxygen and will only increase the flame.
•
Do not modify the burner in any way.

2.3. Installation requirements

The bio-ethanol burner should be installed in an environment that meets
the following characteristics:
•
The burner should be placed horizontally – make sure it is properly
leveled.
•
Do not install the burner in a bathroom or sleeping room.
•
Insert the burner into fireproof materials only.

2.4. Mounting options

The burner can be inserted into any non-flammable material, such as
stone, steel or sheet materials specifically developed for high
SF-xxx-x series bio-ethanol burner
Page 8 / 181 Version 1.3