Vinylexpress Q Serie Guía De Usuario página 242

Step 3: RIP and PRINT: General Tab
The RIP and PRINT window has four tabs. They are, from left to right, General, Panel, Color Management, Advanced
Options, and Contour. The key settings are in the General, Color Management, and Contour tabs.
3.1 You will see a preview of the design in the lower right hand corner of the preview window. Use the
mouse or the Position windows to drag or reposition this so that there is at least a one-inch margin at the bottom and
at the far right edge. The Q Series needs this margin to successfully scan the printed marks.
3.2 Click the Color Management Tab and select the correct ICC profile for your print media.
13-9
Supplement
Move the graphic from
the lower right corner
to provide a 1" (25mm)
margin between the
front and right edges
of the media and the
printed registration
marks.