Multiple Planter Assembly - Glowpear MINI Serie Manual Del Usuario

MULTIPLE PLANTER ASSEMBLY

1
Remove factory fitted reservoir plugs from
adjoining side using a coin and remove seal
washer from plug - Repeat for each planter as
required.
3
Push-fit Joiner Tube onto Joiner Fitting.
NOTE: WHEN CONNECTING WATERING SYSTEMS TO JOINED PLANTERS, IT IS RECOMMENDED NOT TO
JOIN MORE THAN 2 OR 3 PLANTERS IN SEQUENCE WITHOUT ADDITIONAL WATERING LINES.
glowpear.com
2
Reusing the seal washer from the plug, screw in
the Joiner Fitting and tighten firmly by hand.
4
Align planters, bend flexible Joiner Tube around
onto second Joiner Tube and push-fit.
Pg 22