Planting And Watering - Glowpear MINI Serie Manual Del Usuario

PLANTING AND WATERING

1
Add soil mix to Planter (refer to www.glowpear.
com for recommendations).
4
Once surface watering has drained through the
soil media, carefully top up the reservoir via the
fill point until the level indicator pops up (shown
in point 5).
* INDOOR USE - FOR BENCH ENSURE DRIP TRAYS ARE FITTED. Take care not to overfill, water reservoir maximum capacity
is 1.2 gallons (4.5 litres). Stop watering immediately when level indicator is raised, and regularly check / empty any
overflow from Drip Trays.
*
* FOR WALL MODEL – DO NOT OVERFILL WITH WATER AS THIS WILL CAUSE LEAKING THROUGH THE HOLE ON THE BOTTOM
OF THE PLANTER.
glowpear.com
2
Plant seeds or seedlings (refer to www.glowpear.
com for recommendations).
3
Apply 1/2 - 3/4 gallons (2 - 3 Litres) of water directly
to the soil to "water-in" the new plants. Allow to
stand for 1-2 hours before applying further water.
5
Add water* whenever the level indicator drops
- Seeds and small seedlings will require water
direct to the soil for 2-4 weeks as their roots
become established. Note: If level indicator does
not rise during filling, a light tap on top will allow
it to pop up.
Pg 25