Description Of Control Panel; Safety Precautions - TOFO 330 Manual Del Usuario

5. Description of Control Panel

● HOT
: Start Hot Lamination
● COLD
: Start Cold Lamination
● TEMP ▲▼ : Modify temperature( 0~140°C)
● SPEED ▲▼ : 1 ~ 9 Steps
● M1, M2
: Memory function
- How to modify memory
1. Press M1 for one second.
2. Set temperature and set speed.
3. Press M1
● MEAS
: Display actual roller temp.
● STOP
: Stop roller operation
● REV
: Reverse

6. Safety Precautions

1. Do not allow neckties, scarves, etc near could get caught by rollers
and be pulled inside, causing serious personal injury.
2. To prevent possibility of electrical shock, do not immerse machine
in water or permit liquid to spill inside.
3. Close supervision is necessary when any appliance is used
by or near children.
4. Do not open the cover (or back) without authorized service-man.
5. The socket-outlet shall be installed near the equipment and shall be easily
accessible. Disconnect the attachment plug from the receptacle to which it is connected and keep the
power supply cord in your possession while moving the laminator.
Hot Cooling Fan
Measurement
Forward (Motor)
Reverse (Motor)