How To Use - TOFO 330 Manual Del Usuario

9.

How to Use

1. Turn the switch on
2. If it is not the first use,
Press POWER button for 1 second.
3. Press HOT button.
Initial setting for 100 MIC is 100°c, 6.
Hot icon flickers.
4. When it's ready, there will be beep sound for 3 times.
You can start to laminate.
Warning -
Insert the sealing of film forward.
5. Beginning lamination
-If user wishes to laminate faster: User can increase
the speed (the step of 1~9)
-When adhesion of lamination is not satisfactory,
increase the temperature.
6. Finishing lamination
Press POWER button for 1 second.
Once it reaches below 65°C the power stops automatically.
(Keep the temperature 70°C and speed 2 for "STAND BY" mode.)
Warning
Do not turn off the Switch as soon as finishing lamination to prevent overheating.
Follow the Upper method. After the roller cool down, there will be beep sound
for 5 times and then power will be stopped automatically.
7. Cold lamination Press COLD button.
-When the "READY" lamp indicates on LCD with "beep" sound, user can start.
to perform laminating. (User can use cold film only.)
-If user afraid to damage on material, should use COLD lamination.