Toolmicro VM5-VM5-VigiPro Manual De Instrucciones página 18

GENERAL DESCRIPTION
FUNTION BUTTON
Short pulse (Less than 2 seconds)
Puts the equipment in AP mode for data configuration or modification
Long Pulse (More than 4 seconds)
Clears all settings and leaves it in factory exit mode.
BUTTON RESET
Restart the computer but it does not erase the data.
STATUS LED
Red:
It is not configured, and in AP mode for configuration or data modification
Blue:
It is configured, but they have pressed the function button (short pulse) to put it in AP mode and
be able to modify data.
Green:
It is configured and in normal operation.
POWER CONNETOR
Connector for power supply of the equipment. Necessary connector type usb "C" male.
Any modern mobile charger is suitable for power.
Voltage 5 Volts direct current.
Consumption, less than 300mA
UNUSED CONNECTOR
Currently unused connector. Connecting anything here will damage the equipment and void the
warranty.
18 - WWW.TOOLMICRO.COM