Selecting A Power Level For A Heater - baraldi BEAUTY Instrucciones De Uso

USE
The [ON_OFF_KEY] key will be locked to switch On the Cooktop:
• if the key lock is activated ,
• or if there is any appliance error.
2.8 Selecting a power level for a heater
To switch on a heater it is necessary to actuate every cooking zone by means
of two operations:
• Select a heater
• Select the desired cookset.
2.9 Selecting a heater
A heater is selected by touching the heater [HEATER_n_KEY] key for 160 ms,
a beep sounds and the heater display shows the power level.
The heaters that are not selected are shown with a dot point.
The [HEATER_n_KEY] key will be locked to select a heater:
• If the cooktop is off (all the heater displays off), or
• if the key lock is activated , or
• if there is any heater or appliance error.
The heater selection will finish:
• 10 second after the last touch over the [SLIDER] key
• if another heater is selected
• or if the [HEATER_n_KEY] key is touched for 160 ms.
When the heater selection is finished after 10 seconds, a beep sounds and all
the heater displays show the power levels again.
Fig. 5 - Heater selection
INSTRUCTIONS FOR USE
45 / GB