Adding Nails; Functions; Stapling & Nailing - Parkside PAT 4 C3 Traducción Del Manual Original

Adding Nails

Set the On / Off switch
the product.
Turn the product over.
Squeeze the release button
Pull back on the pusher
Follow icon shown on pusher
magazine
After adding nails, slide the pusher
is fully closed, (see Fig B).
4
Release the release button
the magazine
Note: Use the window on the fill indicator
magazine

Functions

Stapling & Nailing
Set the On / Off switch
Press the safety contact
Squeeze the trigger
piece to drive a staple / nail into it.
Set the On / Off switch
product off.
Note: Hold tool firmly and press on work surface before firing to
ensure the complete penetration of the staple / nail.
Clearing Jammed Staples
It may otherwise accidentally be triggered after removing the staple.
Note: Set the On / Off switch
jammed staple.
88 GB/MT
Heruntergeladen von manualslib.de
to the "0" position before working on
8
3
(see Fig. C)
4
3a
to be closed correctly.
4
is empty.
4
to the "I" position to switch the product on.
8
6
whilst holding the product against the work
1
to the "0" position to switch the
8
If a staple is jammed, do not squeeze the trigger
Handbücher-Suchmachiene
(see Fig. A).
3a
(see Fig. A)
(see Fig. C) and add nails to the
3
in again until the magazine
3
. It must click and lock into place for
into the work piece.
to "0" position prior to clearing the
8
to see if the
5
.
1