Information Notice Regarding The Manual; Intended Use - Binder 8012-0556 Manual De Conexión

GB
Installation Manual for RS232/RS422-RS485 Interface Converter
Content
6. Service .............................................................................................................................. 5
1. Information notice regarding the manual ............................................................................ 6
2. Intended use ...................................................................................................................... 6
3. Unit description .................................................................................................................. 7
4. Scope of delivery of RS232/RS422-RS485 interface converter kit ..................................... 8
5. Networking......................................................................................................................... 8
5.1. Bus termination / RS485 operation .................................................................................... 9
6. Service .............................................................................................................................. 9
1.

Information notice regarding the manual

This installation manual contains a short description how to connect and install the RS232/
RS422-RS485 interface converter and the drivers needed. It is expected that the Interface
Converter has been purchased at the BINDER GmbH and thus the correct internal settings
have already been carried out. It is also assumed that only devices and cables of the BINDER
GmbH offered specially for this purpose will be used. To allow also different kinds of use offered
by the RS232/RS422-RS485 interface converter, we include next to this manual also the
original operation manual of the producer W & T.
2.

Intended use

The RS232/RS422-RS485 interface converter is suitable to network temperature chambers with
RS422 or RS485 interface, measurement devices, and the Alarm Box AB01 of the BINDER
GmbH via the RS232 computer interface.
At any computer the communication software APT-COM™ of the BINDER GmbH or an existing
data acquisition system can be used to control the temperature chambers connected to the
RS422 network or RS485 network and to receive and save the chamber measurement data.
Connection of converter RS232/RS422-RS485 09/2016 Page 6/17