Information Notice Regarding The Manual; Intended Use - Binder 8012-0589 Manual De Conexión

GB
Installation Manual for RS485/RS422 Interface Converter
Content
1. Information notice regarding the manual ............................................................................ 7
2. Intended use ...................................................................................................................... 7
3. Unit description .................................................................................................................. 8
4. Scope of delivery of RS485/RS422 interface converter kit ................................................. 9
5. Networking....................................................................................................................... 10
5.1. Bus termination ................................................................................................................ 11
6. Service ............................................................................................................................ 11
1.

Information notice regarding the manual

This installation manual contains a short description how to connect and install the
RS485/RS422 interface converter. It is expected that the Interface Converter has been
purchased at the BINDER GmbH and thus the correct internal settings have already been
carried out. It is also assumed that only devices and cables of the BINDER GmbH offered
specially for this purpose will be used. To allow also different kinds of use offered by the
RS485/RS422 interface converter, we include next to this manual also the original operation
manual of the producer W & T.
2.

Intended use

The RS485/RS422 interface converter is suitable to integrate temperature chambers with a
RS485 interface into an existing RS422 network.
Connection of converter RS422/RS485 09/2016 Page 7/21